OmniPeek Support

Not able to capture all Data Packets with A6210

wifinoob
Posts: 1
Joined: Mon Feb 06, 2017 12:28 am

Not able to capture all Data Packets with A6210

Postby wifinoob » Mon Feb 06, 2017 12:36 am

Hi,

I have a 3x3 AP and one 2x2 client is connected to it.

I am running the capture on channel 100. If I run ping from wired to wireless, it is capturing both echo request and replies. However if i run iperf tcp from wired to wireless, I am not seeing the capture. I do see the Packets received field increment properly but the packets.

I do know the A6210 is a 2x2 dongle.However since I have connected the 2x2 should I able to see the traffic from wired to wireless?

DJWP
Posts: 657
Joined: Tue Oct 30, 2007 11:42 am

Re: Not able to capture all Data Packets with A6210

Postby DJWP » Mon Feb 06, 2017 12:08 pm

We have seen this type of issue with iPerf before, as it does not generate wireless traffic.

We will need more details about your topology, but can assure you this is not an issue with Omnipeek, but an issue with the way iPerf works in this type of environment.

Please contact Tech Support directly:

https://www.savvius.com/support/contact


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 1 guest