Page 1 of 1

Can't see OmniWiFi NICs in 7.5

Posted: Sun Jul 21, 2013 7:35 pm
by brujo12d
Installed OmniPeek 7.5, downloaded and installed x64 OmniWiFi drivers. After launch, no NICs are recognized (Capture Option grayed out, can't see or select any available adapters).

Drivers install ok under Windows 8 (WP and Ralink, Ralink driver works as client NIC). Using Surface Pro with AirMagnet USB hub from multi-adapter kit. All adapters are recognized as active clients on hub with Ralink driver. Tried 7.1 with same result. Ran OmniPeek as Administrator.

Thanks for any assistance,

Re: Can't see OmniWiFi NICs in 7.5

Posted: Wed Jul 31, 2013 9:17 am
by DJWP
What it the serial number of your copy of OmniPeek? It sounds as if you might have OmniPeek Connect, which does not support local capture.

Check with support and they will be able to help.

http://www.wildpackets.com/support/contact