OmniPeek Support

Linksys aggregated capture crash

jwie44
Posts: 3
Joined: Thu Jun 19, 2008 8:34 am

Linksys aggregated capture crash

Postby jwie44 » Thu Jun 19, 2008 8:42 am

Running linksys aggregated capture on Intel Core 2,XP Pro sp2, with 2 gig of ram
Capture set to 1,6,11 capture runs for several minutes then peek crashes.
Have tired on a couple of different platforms (HP and Toshiba) with same results.
Three individual captures on linksys/ralink usb nic(s) seem to run fine set to different channels. Only the aggregated capture crashes.
Any ideas?

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

Postby DJWP » Thu Jun 19, 2008 1:08 pm

We have seen this before and we are we are working on a fix for this issue. In the meantime, we believe it is related to the Expert Performance options, so try disabling them and see if that makes a difference.

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

Postby DJWP » Thu Jun 19, 2008 4:28 pm

A newer version of the aggregator was just posted today that should solve your problem:

https://mypeek.wildpackets.com

It is version 1.0.0.4.

Hope this helps-

jwie44
Posts: 3
Joined: Thu Jun 19, 2008 8:34 am

Postby jwie44 » Fri Jun 20, 2008 7:36 am

Running without expert and the new version 1.0.0.4 appear to have resolved the issue.
Thanks much!


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 1 guest