OmniPeek Support

Problem with driver

kes
Posts: 3
Joined: Thu Sep 11, 2008 1:33 pm

Problem with driver

Postby kes » Fri Sep 12, 2008 10:53 am

Hello,

I recently got the Omnipeek Personal. I'm trying to install the atheros (ar5211.inf) driver but it's giving me the Code 10 error and says the device cannot start. I'm using a Cisco a/b/g card (cb21ag-a-k9). Of course, whenever I try to start a scan it's default to the default Ethernet card. Can some please help?

Thanks,

kes
Posts: 3
Joined: Thu Sep 11, 2008 1:33 pm

Postby kes » Mon Sep 15, 2008 7:47 am

Hmm, Not sure. I did exactly what the install instruction said to do at the Start page of the program. I'm still getting the code10 error.

DJWP
Posts: 687
Joined: Tue Oct 30, 2007 11:42 am

Atheros 4.2.2.9

Postby DJWP » Mon Sep 15, 2008 8:30 am

The Atheros 4.2.2.9 driver is the one you should be using with that Cisco card:

http://www.wildpackets.com/support/downloads/drivers

kes
Posts: 3
Joined: Thu Sep 11, 2008 1:33 pm

Re: Atheros 4.2.2.9

Postby kes » Mon Sep 15, 2008 9:27 am

[quote="DJWP"]The Atheros 4.2.2.9 driver is the one you should be using with that Cisco card:

http://www.wildpackets.com/support/downloads/drivers[/quote]


Thank you! It's works!


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 2 guests