OmniPeek Support

mimo packets not capturing

ubuntuv
Posts: 2
Joined: Wed Apr 21, 2010 8:01 am

mimo packets not capturing

Postby ubuntuv » Wed Apr 21, 2010 8:07 am

hello,

I use Omnipeek 6.0.1 with Atheros AR5008 Network Adapter. I send data on channel 4 with speed 130Mbps(approximately) between two stations. I selected the wireless channel 4-bgn. When I sniffed the packets, the data rate above 24 Mbps are not detected. The packet types of RTS, CTS and BlockAck are only visible.

Please let me know if I have to change any settings in Omnipeek to capture MIMO packets

Thanks
uv.

DJWP
Posts: 687
Joined: Tue Oct 30, 2007 11:42 am

RE: mimo packets not capturing

Postby DJWP » Fri Apr 23, 2010 7:59 am

We would recommend you contact Tech Support for this issue. As they will want to see a trace file of this behavior. If you have a current maintenance contract, you contact support here:

http://www.wildpackets.com/support/contact


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 1 guest