Network Troubleshooting

Omnipeek - Accuracy of time

A general discussion group for network troubleshooting issues.
Posts: 1
Joined: Tue Sep 20, 2016 4:54 pm

Omnipeek - Accuracy of time

Postby cmarodon » Tue Sep 20, 2016 5:15 pm

Hi. In my packet captures with 3 Proxim USB to monitor 3 channels.
I was surprised that the delta time between a Data packet at 54Mbps and the returning ACK at 24Mbps is often very short (0.000001 second = 1 microsecond).
At 24Mbps the tx time of an ACK should be 1 x SIFS (10 microsec) + the PHY header (OFDM 20 microsec) + the MAC header (8 microsec) = 44 microsec. Is there some buffering with Promiscuous mode, with an accuracy around millisec rather than microsec for the time of receiving??

Posts: 692
Joined: Tue Oct 30, 2007 11:42 am

Re: Omnipeek - Accuracy of time

Postby DJWP » Wed Sep 21, 2016 8:04 am

The time resolution will usually be a factor of the Atheros driver and is not handled by Omnipeek.

We would suggest you contact Tech Support directly for this type of detailed question:

Return to “Network Troubleshooting”

Who is online

Users browsing this forum: No registered users and 1 guest