OmniPeek Support

Combined capture from two interfaces

rtector
Posts: 6
Joined: Wed Jul 07, 2010 2:19 am

Combined capture from two interfaces

Postby rtector » Wed Jul 07, 2010 2:25 am

Hi,

Other than using an OmniAdapter or combining the capture files after the fact, I was wondering if there was a way of performing a capture with two source interfaces using OmniEngine Enterprise? In this case, they are standard Intel Pro1000 cards.

Many thanks,

Richard

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

RE: Combined capture from two interfaces

Postby DJWP » Wed Jul 07, 2010 8:01 am

There is not a way to accomplish this at the present time. For Maintenance Customers, there is a Wired Packet Aggregator available on MyPeek, but it works in OmniPeek only and has not yet been ported to the OmniEngine software:

https://mypeek.wildpackets.com/view_sub ... at=3&sl=10

rtector
Posts: 6
Joined: Wed Jul 07, 2010 2:19 am

RE: Combined capture from two interfaces

Postby rtector » Wed Jul 07, 2010 9:04 am

Many thanks.

Are there plans to port this over? If not, please count this as a request :)

Regards,

Richard

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

RE: RE: Combined capture from two interfaces

Postby DJWP » Thu Jul 08, 2010 7:56 am

Hi, Richard-

There are plans to bring the Wired and Wireless aggregator adapters into the OmniEngine software. We don't have a time frame at present, but it will be posted on your MyPeek account when it is available.


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 1 guest