OmniPeek Support

Cisco Remote Adapter

skiverg
Posts: 4
Joined: Wed Jan 21, 2009 7:54 am

Cisco Remote Adapter

Postby skiverg » Wed May 30, 2012 11:43 am

Used to work in prior editions?

Cisco 1142 AP, 5508 Controller.

In OmniPeek Pro -> Tools -> Options -> Analysis Modules ->
Cisco Remote Adapter enabled

config network ip-mac-binding disable
config ap mode sniffer APNAME
config ap sniff 802.11a enable 36 192.168.26.26 APNAME

show ap config 802.11a

Everything seems to be in order.

No packets captured.

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

RE: Cisco Remote Adapter

Postby DJWP » Wed May 30, 2012 1:30 pm

Do you have the Analysis Modules enabled in the Analysis Options dialog in the General Capture options?

skiverg
Posts: 4
Joined: Wed Jan 21, 2009 7:54 am

RE: RE: Cisco Remote Adapter

Postby skiverg » Wed May 30, 2012 1:36 pm

Yes the analysis module is enabled

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

RE: RE: RE: Cisco Remote Adapter

Postby DJWP » Wed May 30, 2012 2:36 pm

If you have your controller configured correctly, and have current maintenance, contact Tech Support:

http://www.wildpackets.com/resources/to ... lugin_tips

http://www.wildpackets.com/support/contact

skiverg
Posts: 4
Joined: Wed Jan 21, 2009 7:54 am

Re: Cisco Remote Adapter

Postby skiverg » Wed Nov 20, 2013 1:35 pm

I have an updated file on How to capture using Cisco Wireless Adapter in Omnipeek. Using NCS Prime 1.3.

Message me if you want the .rtf file.

DJWP
Posts: 682
Joined: Tue Oct 30, 2007 11:42 am

Re: Cisco Remote Adapter

Postby DJWP » Fri Nov 22, 2013 9:27 am

Sure, send your tip to us using the support contact form on our website.

Much appreciated-


Return to “OmniPeek Support”

Who is online

Users browsing this forum: No registered users and 2 guests